RuggedCom RuggedRouter RX1000 - Manual (Page 129)

Chapter 12 – Configuring An IPsec VPN
After a VPN connection is created this menu will display an icon for the connection,
as shown in the next view of the VPN Configuration menu.
The “Add defaults for all connections” link allows you to create a profile that will
apply to all connections for items such as key type, encryption protocol and
compression. These defaults can then be overridden on a per connection basis.
The “Add a new IPsec VPN connection” link creates a new connection and its icon.
The “Import connection from file” link creates new connections from imported data.
Select the Server Configuration icon to configure server parameters.
Select the Preshared Keys icon to create, delete and edit pre-shared keys.
Select the Show Public Keys icon to display the server's public key.
Select the IPsec Status icon to display information about the server's capabilities and
any current connections..
After a VPN connection is created this menu will include a “Start Connection” button
that can start or restart VPN connections. This button is shown in the next view of the
VPN Configuration menu.
RuggedCom 127