RuggedCom RuggedRouter RX1000 - Manual (Page 253)

Chapter 26 – Maintaining The Router
Trap Configuration
Figure 223: Trap Configuration page, Trap Options
The Trap Configuration page manages SNMP trap destinations. Under Trap
Generation Options, you may enable the generation of notifications on
authentication failures or IP interface link up/down events.
Figure 224: Trap Destinations V1 and V2c
The SNMP V1 and V2c Trap Destinations part of the menu allows the creation and
deletion of trap destinations.
The Type field specifies the exchange used with this destination, either V1 trap, V2c
trap or V2c inform.
The IP address and Trap Community fields specifies the receivers IP address and
community name.
Figure 225: Trap Destinations V3
RuggedCom 251