RuggedCom RuggedRouter RX1000 - Manual (Page 227)

Chapter 24 – Configuring IRIGB And IEEE1588
IRIGB/IEEE1588 Main Menu
Figure 187: IRIGB/1588 Main Menu
This menu allows you to configure IRIGB and IEEE1588, display its current status
and review historical changes.
General Configuration
Figure 188: IRIGB/IEEE1588 General Configuration menu
This menu allow you to configure general parameters.
The Reference Clock Selection field selects the order in which to prefer reference
clocks.
The Cable Compensation field specifies the value, in nanoseconds, that will be used
to compensate for the cable type and length. The compensation is done using integer
nanosecond values. Fractional decimal values will be truncated.
RuggedCom 225