RuggedCom RuggedRouter RX1000 - Manual (Page 213)

Chapter 21 - Configuring The DHCP server
The Hardware address field is the Ethernet MAC of the client associated with the
host entry.
The Fixed IP address field is the IP to assign to the matching client.
DHCP Pool Configuration
Figure 175: DHCP Pool Configuration
The settings specific to the Address Pool menu are the Failover peer and Clients to
allow/deny.
The Failover peer field is the IP address of a DHCP peer server if a fail over pool is
created.
The Clients to allow/deny field can be used to control which clients can get IP
address from the pool. See documentation for dhcpd3 for syntax and allowed values.
Very rarely needed. The Allow unknown clients setting already handles the most
common use of this option.
RuggedCom 211