RuggedCom RuggedRouter RX1000 - Manual (Page 222)

RuggedRouter  User Guide
Networking
Figure 185: SSH Server Networking
The Listen on addresses fields determine an IP addresses and port upon which SSH
will accept a connection.
The Listen on port field determines the port number SSH will listen on, assuming
Listen on addresses is set to “All addresses”.
The Accept Protocols fields determine which versions of SSH will be allowed.
The Disconnect if client has crashed field determines whether the SSH server should
periodically check to see if the client is still alive.
The Time to wait for login field determines the maximum time from a connection
request until login completes, after which the client will be disconnected.
The Allow TCP forwarding field specifies whether TCP forwarding is permitted. If
this option is set, clients on a remote network can tunnel TCP connections to
machines on the RuggedRouter's network.
The Allow connection to forwarded ports field specifies whether remote hosts on
the client network are allowed to connect to ports forwarded for the client.
Access Control
Figure 186: SSH Server Access Control
220 RuggedCom