RuggedCom RuggedRouter RX1000 - Manual (Page 192)

RuggedRouter  User Guide
The Pack Char field configures the numeric value of the ASCII character which will
force forwarding of accumulated data to the network. The Pack Char must be
between 0 and 255 inclusive or the value off. If configured off, accumulated data will
be forwarded based upon the packetization timeout parameter.
The Pack Timer field configures the delay from the last received character until
when data is forwarded. The Pack Timer must be between 5 and 1000 milliseconds
inclusive.
The Turnaround timer field controls the amount of delay (if any) to insert between
the transmissions of individual messages out the serial port. The Pack Timer must be
between 1 and 1000 milliseconds inclusive, of off.
The Call Dir field configures whether to accept an incoming connection, place an
outgoing connection or do both.
The Max Conns field configures the maximum number of incoming connections to
permit when the call direction is incoming.
The Remote IP field configures the address used when placing an outgoing
connection.
The Remote Port field selects the TCP destination port used in outgoing connections.
The Local Port field selects the local TCP port to use to accept incoming
connections.
190 RuggedCom