Roland V-Piano - Manual (Page 12)

12
Panel descriptions
1. [VOLUME] Knob
Adjusts the volume that is output from the rear panel OUTPUT jacks
and headphone jack (p.23).
2. [AMBIENCE] Knob
Adjusts the amount of ambience effect, which adds acoustic
resonance to the sound (p.39).
3. [EQUALIZER] Button
Turns the equalizer on/off (p.37).
The [EQUALIZER] button will light when the equalizer is on.
4. [V-LINK] Button
Turns the V-LINK function on/off.
When this is on, the [V-LINK] button will light, allowing a V-LINK
compatible video device connected to the V-Piano to be controlled
from the V-Piano (p.96).
5. [TRANSPOSE] Button
Transposes the pitch (p.41).
The [TRANSPOSE] button will light when transpose is turned on.
By pressing this button simultaneously with the [V-LINK] button,
you can play demo songs (p.32).
6. TONE Buttons: [TONE 1]–[TONE 4]
Use these buttons to select tones.
Alternatively, you can change the System settings so that these
buttons will select setups (p.62).
7. [FUNCTION] Button
This switches the function of function buttons [F1]–[F4].
The [FUNCTION] button will light when the function is on.
8. Display
This shows information such as the tone name, setup name, or the
item you’re editing.
The explanations in this manual include illustrations that
depict what should typically be shown by the display. Note,
however, that your unit may incorporate a newer, enhanced
version of the system (e.g., includes newer sounds), so what
you actually see in the display may not always match what
appears in the manual.
9. [F1] –[F4] Buttons
When editing, you’ll use these buttons to execute a variety of
functions; their operation will differ depending on the screen.
10. [VALUE] Dial ([ENTER] Button])
Use this to modify values.
fig.dial-value.eps
By pressing the VALUE dial, you can finalize a value or execute an
operation ([ENTER] button).
fig.dial-push.eps
Front panel
V-Piano_e.book 12 ページ ２００９年１月２８日 水曜日 午前９時１０分