Roland V-Piano - Manual (Page 52)

52
Customizing the V-Piano’s sounds
4. When you’ve finished entering the name, press the [ENTER] button or [EXIT] button to return to the previous
screen.
fig.customize-5.eps
5. Turn the [VALUE] dial to select the write-destination tone number.
fig.customize-5.eps
6. Press the [F4 (EXECUTE)] button to save the tone.
7. A confirmation screen will appear; press [F4 (OK)].
fig.ToneSave01.eps
If you decide to cancel without saving, press [F1 (CANCEL)].
The display will indicate “Executing...” while the data is being saved. Never turn off the power during this time.
8. When the data has been saved, press the [EXIT] button to return to the previous screen.
V-Piano_e.book 52 ページ ２００９年１月２８日 水曜日 午前９時１０分