Roland V-Piano - Manual (Page 17)

17
Getting ready
If using the KS-G8 stand
1. Place the V-Piano in the position shown in the illustration.
1. Before you begin making connections, confirm the following.
Is the volume level of the V-Piano or connected amp turned all the way down?
Is the power to the V-Piano or connected amp turned off?
2. Connect the supplied power cord to the AC Inlet of the V-Piano, and plug the other end into an AC outlet.
Connecting the power cord
Align the screws of the
V-Piano with the front
of the stand.
Align the symbol ( )
on the V-Piano with
the center of support
column of the stand.
V-Piano_e.book 17 ページ ２００９年１月２８日 水曜日 午前９時１０分