Roland V-Piano - Manual (Page 57)

57
Customizing the V-Piano’s sounds
The following parameters can be made to vary according to the force with which you strike the key.
• Unison Tune
• Hammer Hardness
• Cross Resonance
• Decay Time
• Tone Color
“Velocity Follow” refers to the way in which the strength of an effect changes according to the keyboard playing dynamics.
1. Press the [F3 (Velocity)] button.
2. Turn the [VALUE] dial to adjust the Velocity Follow setting.
With positive (+) values, the effect will increase as you play more strongly.
With negative (-) values, the effect will increase as you play more softly.
Unison Tune allows you to tune the 1st string and 3rd string independently.
In the parameter setting screen, you can press the [F4 (String)] button repeatedly to make fine adjustments to the pitch of the 1st
string and 3rd string.
fig.UnisonTune01.eps
Editing this parameter will have no effect for keys that are strung with only one string.
Velocity Follow settings
With positive (+) values of Velocity Follow With negative (-) values of Velocity Follow
Unison Tune parameters
VF=100
VF=50
VF=0
0
Keyboard playing strength
Maximum
Value of
parameter
0
VF=-100
VF=-50
VF=0
Keyboard playing strength
Maximum
Value of
parameter
V-Piano_e.book 57 ページ ２００９年１月２８日 水曜日 午前９時１０分