Roland V-Piano - Manual (Page 55)

55
Customizing the V-Piano’s sounds
The following parameters can be individually edited for each key.
• Soft Pedal Sense
• Unison Tune
• Hammer Hardness
• Cross Resonance
• Decay Time
• Tone Color
• Damping Time
1. Assign Stretch Tune (STRETCH) to one of the [F1]–[F4] buttons and select it.
2. Press the [ENTER] button to access the edit screen.
fig.RangeSet02.eps
Press the [F2 (Clear)] button and a confirmation screen will appear. If you’re sure that you want to return the values for all
keys to their initial state (as prescribed by the tone that’s selected), press the [F4 (OK)] button. If you decide that you don’t
want to do this, press the [F2 (CANCEL)] button.
Press the [F1 (RangeSet)] button to specify the key(s) that you want to edit.
To edit the setting of an individual key
1. Press the [F1 (RangeSet)] button.
2. Play the key whose setting that you want to edit.
3. Use the [VALUE] dial to edit the setting.
4. Press the [F1 (RangeSet)] button once again to return to the parameter setting screen.
Editing individual keys
Button Function
[F1 (RangeSet)] Specifies the key to be edited.
[F2 (Clear)] Returns the values for all keys to their initial state, as prescribed by the selected tone.
[F3 (Velocity)] Edits the velocity follow setting.
Specifying the key range (RangeSet)
V-Piano_e.book 55 ページ ２００９年１月２８日 水曜日 午前９時１０分