Roland V-Piano - Manual (Page 92)

92
Detailed settings for various functions (Utility screen)
Here’s how a performance you recorded on the V-Piano can be saved to internal memory or to USB memory (sold separately)
connected to the USB memory connector.
1. In the File screen, turn the [VALUE] dial to select “Save SONG File,” and press the [ENTER] button or the [F1
(ENTER)] button.
fig.UtilSongSave01.eps
2. Select the media on which you want to save the song file.
In the Save SONG File screen, press the [F1 (MEDIA)] button to select the save-destination media.
3. Assign a name to the song file. Press the [F2 (RENAME)] button.
fig.UtilSongSave03.eps
• Use the [VALUE] dial to change the character.
• Press the [F1 (INSERT)] button to insert a space.
• Press the [F2 (DELETE)] button to delete the character at the cursor location.
• Press the [F3] button to move the cursor one character to the left.
• Press the [F4] button to move the cursor one character to the right.
When you’ve specified the name, press the [ENTER] button or the [EXIT] button to return to the previous screen.
4. When you’ve finished entering the file name, press the [F4 (EXECUTE)] button to start saving the file.
fig.UtilSongSave04.eps
The screen will indicate “Executing...” while the file is being saved. Never turn off the power while this screen is shown.
If a file of the same name already exists, the confirmation message “File Exists Overwrite OK?” appears. If you want to
overwrite the existing setup file, press the [F4 (OK)] button. If you want to re-save the file under a different name, press the
[F1 (CANCEL)] button.
5. When the file has been saved, press the [EXIT] button to return to the previous screen.
Saving a song (Save SONG File)
Value Media
INT V-Piano’s internal memory
USB USB memory connected to the USB memory connector
V-Piano_e.book 92 ページ ２００９年１月２８日 水曜日 午前９時１０分