Raymarine autopilot + ST4000+ - Manual (Page 120)

Chapter 7: Customizing the ST4000+ 105
7
Customiz
in
g the
ST400
0+
• Press disp to move to the next data page you want to change, or
press and hold standby for 2 seconds to exit and save changes.
The available pages are:
Data Displayed as
Speed Knots SPEED KTS
Log LOG XXXX.X
Trip TRIP XXX.X
Average Speed, Knots AV. SPD KTS
Wind Direction e.g. WIND PORT
Wind Speed WIND KTS
Depth Metres* DEPTH M
Depth Feet* DEPTH FT
Depth Fathoms* DEPTH FA
Heading HEADING
Water Temperature, Degrees C* WATER °C
Water Temperature, Degrees F* WATER °F
Course Over Ground COG
Speed Over Ground, Knots SOG KTS
Cross Track Error XTE
Distance to Waypoint DTW
Bearing to Waypoint BTW
Rudder Gain RUDD GAIN
Response RESPONSE
Watch WATCH - used to control the Watch timer
Universal Time Coordinated UTC
NOT USED Page not displayed
(Any data page set to NOT USED is not
displayed when you scroll through the data
pages during normal operation)
*Note: There are 3 depth pages (meters, feet and fathoms) and 2 water
temperature pages (°C and °F). The ST4000+ will display the water temperature
or depth data in the units defined by page you select.