Changing course in auto mode, Dodging obstacles in auto mode – Raymarine autopilot + ST4000+ User Manual
Page 23
Advertising
8
ST4000+ Wheel & Tiller Autopilots: Owner’s Handbook
Changing course in Auto mode
In Auto mode, use the -1 and -10 (port) and +1 and +10 (starboard)
keys to change the locked heading in steps of 1° or 10°. For example:
press -10 three times for a 30° course change to port.
Dodging obstacles in Auto mode
To avoid an obstacle when your boat is under autopilot control:
1. Select a course change in the appropriate direction. For example,
press -10 three times for a 30° dodge to port.
2. When safely clear of the obstacle, you can either:
•
reverse the previous course change (for example, press +10
three times), or
•
return to the previous locked heading (LAST HDG)
Port
Starboard
or
or
D3320-2
D3303-2
Original
course
Dodge
Obstacle
Advertising