Raymarine autopilot + ST4000+ - Manual (Page 28)

Chapter 2: Basic Operation 13
2
Bas
ic Op
er
atio
n
Note: If you have set up the RESPONSE screen as a default data page
(see page 104) you can also access it by pressing disp and then
scrolling through the data pages.
2. Press -1 or +1 to change the response level.
3. Press disp or wait for 5 seconds to return to the previous display.
Changing the rudder gain
To make a temporary change to the rudder gain:
1. Press the -1 and +1 keys together for 1 second to display the
rudder gain (RUDD GAIN) screen
Note: If you have set up the RUDD GAIN screen as a default data page
(see page 104) you can also access it by pressing disp and then
scrolling through the data pages.
2. Press -1 or +1 to change the rudder gain.
3. Press disp or wait for 5 seconds to return to the previous display.
Note: See page 96 for instructions on how to check that the rudder
gain is set correctly.
D5400-1
Increase
rudder gain
Decrease
rudder gain
SECOND