Area units, Volume units – Retrotech DM-2A User Manual
Page 26
18
Retrotec Energy Innovations, Ltd.
DM-2A Mark II 2008-02-22
The Power Down feature affects normal operation during testing. Be certain to allow for
typical testing operations when choosing a setting.
Area Units
You can choose your unit measure preference for the area measurements that are displayed
on the gauge using the Area setup option (shown next). The area units may be set to square feet
(ft
2
), square meters (m
2
), square centimeters (cm
2
), or square inches (in
2
).
Volume Units
You can choose your Volume unit measure preference (as shown next) for the volume
measurements that are displayed on the gauge. The volume units may be set to cubic feet (ft
2
) or
cubic meters (m
2
).
DM-2A Mark II Dual-Channel Pressure Gauge
User Manual
2:
Working with the Setup Screen