Raritan Engineering KX2-864 - Manual (Page 137)

Chapter 7: Device Management
128
2. Choose your time zone from the Time Zone drop-down list.
3. To adjust for daylight savings time, check the "Adjust for daylight
savings time" checkbox.
4. Choose the method you would like to use to set the date and time:
ƒ User Specified Time - Choose this option to input the date and
time manually.
For the User Specified Time option, enter the date and time. For
the time, use the hh:mm format (using a 24-hour clock).
ƒ Synchronize with NTP Server - Choose this option to synchronize
the date and time with the Network Time Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server. Optional
6. Click OK.
Note: Both IPv4 and IPv6 addresses are supported.