Raritan Engineering KX2-864 - Manual (Page 72)

Chapter 3: Working with Target Servers
63
Video Properties
Refresh Screen
The Refresh Screen command forces a refresh of the video screen.
Video settings can be refreshed automatically in several ways:
•
The Refresh Screen command forces a refresh of the video screen.
•
The Auto-sense Video Settings command automatically detects the
target server's video settings.
•
The Calibrate Color command calibrates the video to enhance the
colors being displayed.
In addition, you can manually adjust the settings using the Video Settings
command.
To refresh the video settings, do one of the following:
•
Choose Video > Refresh Screen or click the Refresh Screen button
in the toolbar.
Auto-Sense Video Settings
The Auto-sense Video Settings command forces a re-sensing of the
video settings (resolution, refresh rate) and redraws the video screen.
To automatically detect the video settings, do the following:
•
Choose Video > Auto-sense Video Settings or click the Auto-Sense
Video Settings button in the toolbar. A message stating that the
auto adjustment is in progress appears.
Calibrate Color
Use the Calibrate Color command to optimize the color levels (hue,
brightness, saturation) of the transmitted video images. The Dominion
KX II color settings are on a target server-basis.
Note: The Calibrate Color command applies to the current connection
only.
To calibrate the color, do the following:
•
Choose Video > Calibrate Color or click the Calibrate Color button
in the toolbar. The target device screen updates its color
calibration.