Raritan Engineering KX2-864 - Manual (Page 169)

Chapter 7: Device Management
160
To delete a port group:
1. Click on the Port Group Management page, select the checkbox of
the port group you want to delete.
2. Click the Delete button.
3. Click OK on the warning message.
Supported Blade Chassis Models
This table contains the blade chassis models that are supported by the
Dominion KX II and the corresponding profiles that should be selected
per chassis model when configuring them in the Dominion KX II
application. A list of these models can be selected on the Port
Configuration page from the Blade Server Chassis Model drop-down,
which appears when the Blade Chassis radio button is selected. For
details on how to configure each blade chassis model, see their
corresponding topics in this section of the help.
Blade chassis model Dominion KX II Profile
Dell PowerEdge 1855/1955 Dell PowerEdge 1855/1955
Dell PowerEdge M1000e Dell PowerEdge M1000e
IBM BladeCenter S IBM (Other)
IBM BladeCenter H IBM BladeCenter H
IBM BladeCenter T IBM (Other)
IBM BladeCenter HT IBM (Other)
IBM BladeCenter E IBM BladeCenter E
HP Configure using Port Group Management
functions. See
HP ® Blade Chassis
Configuration (Port Group
Management)
(on page 158).