Event management, Configuring event management - settings, Snmp configuration – Raritan Engineering KX2-864 User Manual

Page 138: To configure snmp (enable snmp logging), To configure the syslog (enable syslog forwarding)

Advertising
background image

Chapter 7: Device Management

129

Event Management

The Dominion KX II Event Management feature provides a set of
screens for enabling and disabling the distribution of system events to
SNMP Managers, Syslog, and the audit log. These events are
categorized, and for each event you can determine whether you want the
event sent to one or several destinations.

Configuring Event Management - Settings

SNMP Configuration

Simple Network Management Protocol (SNMP) is a protocol governing
network management and the monitoring of network devices and their
functions. The Dominion KX II offers SNMP Agent support through Event
Management.

To configure SNMP (enable SNMP logging):

1. Choose Device Settings > Event Management - Settings. The Event

Management - Settings page appears.

2. Select SNMP Logging Enabled. This enables the remaining SNMP

fields.

3. In the Name, Contact, and Location fields, type the SNMP agent's

name (that is, the device's name) as it appears in the Dominion KX II
Console interface, a contact name related to this device, and where
the Dominion device is physically located.

4. Type the Agent Community String (the device's string). An SNMP

community is the group to which devices and management stations
running SNMP belong. It helps define where information is sent. The
community name is used to identify the group. The SNMP device or
agent may belong to more than one SNMP community.

5. Specify whether the community is Read-Only or Read/Write using

the Type drop-down list.

6. Configure up to five SNMP managers by specifying their Destination

IP/Host Name, Port #, and Community.

7. Click the Click here to view the Dominion SNMP MIB link to access

the SNMP Management Information Base.

8. Click

OK.

To configure the Syslog (enable Syslog forwarding):

1. Select Enable Syslog Forwarding to log the device's messages to a

remote Syslog server.

Advertising
This manual is related to the following products: