Raritan Engineering KX2-864 - Manual (Page 170)

Chapter 7: Device Management
161
Supported CIMs for Blade Chassis
The following CIMs are supported for blade chassis being managed
through the Dominion KX II:
•
DCIM-PS2
•
DCIM-USBG2
•
D2CIM-VUSB
•
D2CIM-DVUSB
Following is a table containing supported CIMs for each blade chassis
model that the Dominion KX II supports.
Blade chassis Connection method Recommended CIM(s)
Generic If a D2CIM-VUSB or D2CIM-DVUSB is used
when connecting to a blade-chassis configured
as Generic, you will be able to select the USB
profiles from the Port Configuration page and
the client's USB Profile menu. However, virtual
media is not supported for generic blade
chassis and the Virtual Media menu is disabled
on the client.
•
DCIM-PS2
•
DCIM-USBG2
Dell PowerEdge
1855 Includes one of the three KVM modules :
•
Analog KVM Ethernet switch module
(standard)
•
Digital Access KVM switch module
(optional)
•
KVM switch module (standard on systems
sold prior to April, 2005)
These switches provide a custom connector
that allows two PS/2 and one video device to
be connected to the system.
Source: Dell PowerEdge 1855 User Guide
•
DCIM-PS2
Dell PowerEdge
1955 One of two types of KVM modules may be
installed:
•
Analog KVM switch module
•
Digital Access KVM switch module
Both modules enable you to connect a
PS/2-compatible keyboard, mouse and video
monitor to the system (using a custom cable
provided with the system).
Source: Dell PowerEdge 1955 Owner's Manual
•
DCIM-PS2