Raritan Engineering KX2-864 - Manual (Page 33)

Chapter 2: Installation and Configuration
24
4. Use the sliders to set the Mouse acceleration to 1.0 and Threshold to
1.0.
5. Click OK.
To configure the video:
1. From the Launcher, select Application Manager.
2. Select System_Admin.
3. Choose Smit > Devices > Graphic Displays > Select the Display
Resolution and Refresh Rate.
4. Select the video card in use.
5. Click List. A list of display modes is presented.
6. Select a resolution and refresh rate supported by the Dominion KX II.
See Supported Video Resolutions (on page 246) for more
information.
Note: If you change the video resolution, you must log out of the target
server and log back in for the video settings to take effect.
Make UNIX Settings Permanent
Note: These steps may vary slightly depending on the type of UNIX® (for
example, Solaris, IBM AIX) and the specific version in use.
1. Choose Style Manager > Startup. The Style Manager - Startup
dialog appears.
2. On the Logout Confirmation dialog, select the On option. This option
prompts you to save your current session when you log out.
Apple Macintosh® Settings
For KVM target servers running an Apple Macintosh operating system,
the preferred method is to use the D2CIM-VUSB and Absolute Mouse
Synchronization.
Note: 'USB Profile 'Mac OS-X, version 10.4.9 and later' must be select
from the USB Profile menu or the Port Configuration page.
Step 2: Configure Network Firewall Settings
To access Dominion KX II through a network firewall via Multi-Platform
Client or through the Port Access page, your firewall must allow
communication on TCP Port 5000 or another port that you designate.