Raritan Engineering KX2-864 - Manual (Page 210)

Chapter 10: Maintenance
201
Stopping CC-SG Management
While the Dominion KX II is under CC-SG management, if you try to
access the device directly, you are notified that it the device is under
CC-SG management.
If you are managing the Dominion KX II through CC-SG and connectivity
between CC-SG and the Dominion KX II is lost after the specified
timeout interval (typically 10 minutes), you are able to end the CC-SG
management session from the Dominion KX II console.
Note: You must have the appropriate permissions to end CC-SG
management of the Dominion KX II. Additionally, the Stop CC-SG
Management option will not be provided unless you are currently using
CC-SG to manage the Dominion KX II.
To stop CC-SG management of a Dominion KX II:
1. Click Maintenance > Stop CC-SG Management. A message
indicating that the device is being managed by CC-SG will be
displayed. An option to remove the device from CC-SG management
will also be displayed.
2. Click Yes to begin the processing of removing the device from
CC-SG management. A confirmation message will then displayed
asking you to confirm that you want the remove the device from
CC-SG management.