Roland SONAR V-STUDIO VS-100 - Manual (Page 24)

24
fig.proppage.eps
The VS-100 properties page displays the names of the parameters
that can be controlled with the [R1]–[R4] knobs.
You can also configure the action of the footswitches or of the
motor fader connected to SONAR V-STUDIO 100.
To display the VS-100 properties page, in SONAR, select “VS-100”
command from “Tools” menu.
When the VS-100 properties page is displayed, pressing the [F1]
key on your computer displays the online Help. For more
information about the VS-100 properties page, see the online Help.
If you set the system setting “DAW Select” (p. 55) to “Other,” the SONAR V-STUDIO 100 will be recognized as a
Mackie Control from your DAW software, and you’ll be able to use the controllers enclosed by the frame in the
illustration to control your DAW software.
fig.Mackie.eps
By default, no function is assigned to the , , [VIEW], and [MARKER] buttons. Use the assign
function of your DAW software to assign the desired function to these buttons.
For details on how to make settings in your DAW, refer to the documentation for your DAW.
For DAW software other than SONAR, you won’t be able to turn on the [ACT] button.
For details on making system settings, refer to “System settings” (p. 52).
VS-100 properties page
Using DAW software other than SONAR
VS-100_r_e.book 24 ページ ２００９年３月２５日 水曜日 午前９時３４分