Roland SONAR V-STUDIO VS-100 - Manual (Page 28)

28
Using the WAVE recorder
In SONAR V-STUDIO 100, data is recorded on an SD memory card.
Inserting an SD memory card
fig.sd-ins.eps
NEVER insert or remove an SD memory card when the power of
SONAR V-STUDIO 100 is on. Doing so may result in the loss of
data from the SONAR V-STUDIO 100 or the SD memory card.
1. Turn the power off.
2. Insert the SD card into the SD card slot.
• Never insert or remove an SD memory card while this unit’s power is on.
Doing so may corrupt the unit’s data or the data on the SD memory card.
• Carefully insert the SD memory card all the way in—until it is firmly in
place.
3. Turn the power on.
Removing an SD memory card
1. Turn the power off.
2. Push the memory card forward lightly and release your finger.
The memory card will pop out slightly. Pull the card out.
Formatting an SD memory card
If you use a new SD memory card, or if you use an SD memory card that has been used in other devices such as
personal computers, the card will need to be formatted before it can be used for the SONAR V-STUDIO 100.
“Formatting an SD memory card” (p. 52)
SD memory card
VS-100_r_e.book 28 ページ ２００９年３月２５日 水曜日 午前９時３４分