Ricoh CL3000DN - Manual (Page 27)

Loading Paper
23
2
Changing paper size of the paper tray
AAAA
Pull the paper tray out of the
printer until it stops. After that,
lift it slightly, and then pull it out
completely. Place it on a flat sur-
face
BBBB
Remove the paper.
CCCC
Press "Push", and then adjust the
rear guide to the paper size you
are using.
DDDD
Adjust the side guides to the pa-
per size you want to load.
EEEE
Load paper into the paper tray,
with the print side up.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
FFFF
Slide the paper tray completely
into the printer.
Specifying a paper type
By selecting the paper type you want
to load, the printer can perform print-
ing better.
You can select from the following pa-
per types:
• Plain Paper, Recycled Paper, Spe-
cial Paper, Color Paper, Letter-
head, Preprinted, Prepunched,
Bond Paper, Cardstock
ZHBY010E
ZHBY030E
ZHBY040E
ZHBY060E
ZHBY020E
AresPGBMaintGuide-F_FM.book Page 23 Friday, July 26, 2002 5:17 PM