Ricoh CL3000DN User Manual
Page 54
Cleaning and Adjusting the Printer
50
4
❒ If the image density of the Im-
age Density Adjusting Card is
equal to the density shown
above the frame, select “-” for
the image density setting. If the
image density of the Image
Density Adjusting Card is equal
to the density shown below the
frame, select “+” for the image
density setting.
FFFF
Press the
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to select
the color you want to adjust, and
then press the
{{{{Enter #}}}} key.
GGGG
Press the
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to set the
image density value, and then
press the
{{{{Enter #}}}} key.
Note
❒ You can adjust the image densi-
ty in 21 steps from -10 to +10. In-
creasing the value makes the
printouts darker and decreasing
the value makes the printouts
lighter.
❒ Pressing the {{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key
makes the value increase or de-
crease by one.
To adjust another color, repeat the
steps
F
and
G
.
HHHH
Press the
{{{{On Line}}}} key.
"Ready" appears on the panel dis-
play.
Image Density:
Black
Black:
(-10 +10) 0
Ready
AresPGBMaintGuide-F_FM.book Page 50 Friday, July 26, 2002 5:17 PM