Loading paper in the bypass tray – Ricoh CL3000DN User Manual

Page 28

Advertising
background image

Paper and Other Media

24

2

Note

❒ When selecting "Plain Paper", se-

lect either "Thin" or "Normal" for
"PlainPaper Type" in the "Mainte-
nance" menu.

AAAA

Press the

{{{{Menu}}}} key.

"Menu" appears on the panel dis-
play.

BBBB

Press the

{{{{U

U

U

U}}}} or {{{{T

T

T

T}}}} key to dis-

play "Paper Input", and then
press the

{{{{Enter #}}}} key.

CCCC

Press the

{{{{U

U

U

U}}}} or {{{{T

T

T

T}}}} key to dis-

play "Paper Type", and then press
the

{{{{Enter #}}}} key.

DDDD

Press the

{{{{U

U

U

U}}}} or {{{{T

T

T

T}}}} key to dis-

play "Tray 1", and then press the

{{{{Enter #}}}} key.

EEEE

Press the

{{{{U

U

U

U}}}} or {{{{T

T

T

T}}}} key to dis-

play the loaded paper type, and
then press the

{{{{Enter #}}}} key.

In about two seconds, “Menu” ap-
pears on the panel display.

FFFF

Press the

{{{{On Line}}}} key.

"Ready" appears on the panel dis-
play.

Loading Paper in the Bypass
Tray

In addition to plain paper, you can
load thick paper, envelopes, glossy
paper and OHP transparencies onto
the Bypass Tray.

Note

❒ Paper sizes supported by the By-

pass Tray can be 90 - 216 mm (3.5 -
8.5 inches) in width, and 148 - 356
mm (5.8 - 14 inches) in length.

❒ The paper size selected with the

printer driver overrides the one se-
lected with the control panel. You
do not have to make settings with
the control panel if you have al-
ready made them with the printer
driver. However, when using a
printer driver other than the RPCS
printer driver, you must make the
settings using the control panel.
For more information about the
printer driver, see the printer driv-
er's Help. Also, see p.27 “Specify-
ing a paper type for the Bypass
Tray”.

❒ If you load thick paper, or plain or

thick paper that has been already
printed on one side, make the set-
tings for the paper type with the
control panel or the printer driver.
See p.26 “Specifying a custom pa-
per size for the Bypass Tray”.

❒ The number of pages that can be

loaded in the Bypass Tray differs
depending on the paper type.

Menu:

Paper Input

Paper Input:

Paper Type

Paper Type:

Tray 1

Tray 1:

Recycled Paper

AresPGBMaintGuide-F_FM.book Page 24 Friday, July 26, 2002 5:17 PM

Advertising
This manual is related to the following products: