Ricoh CL3000DN - Manual (Page 76)

Troubleshooting
72
5
When "Remove Misfeed Y:
Paper Tray" Appears
AAAA
Pull out the tray.
Important
❒ When pulling it out, be careful not
to pull it strongly. If you do, the
tray might fall and cause an injury.
BBBB
Remove the misfed paper.
❖ ❖ ❖ ❖ Tray 1
❖ ❖ ❖ ❖ Tray 2/3
CCCC
Slide the paper tray completely
into the printer.
Important
❒ Be sure to insert the paper tray
completely. Otherwise, mis-
feeds might occur.
DDDD
Open the front cover by pushing
the front cover release button,
and then close it to reset the mis-
feed condition.
Note
❒ You can apply this procedure
for both the paper tray and the
optional Paper Feed Unit.
ZHBH940E
ZHBH760E
ZHBH770E
ZHBH160E
ZHBH170E
AresPGBMaintGuide-F_FM.book Page 72 Friday, July 26, 2002 5:17 PM