Ricoh CL3000DN - Manual (Page 73)

Removing Misfed Paper
69
5
Removing Misfed Paper
When a paper misfeed occurs, an er-
ror message appears on the panel dis-
play. Remove the misfed paper from
the location indicated.
Important
❒ Toner dust may be on the misfed
paper after removal. Be careful not
to get it on your hands or clothes.
❒ Toner dust may be on the paper
printed after removing misfed pa-
per. Make a few prints until smears
do not appear any more.
❒ Forcefully removing misfed paper
may cause paper to tear and leave
scraps of paper in the printer. This
might cause a misfeed and damage
the printer.
When "Remove Misfeed
A:Internal Path" Appears
R CAUTION:
AAAA
Open the front cover by pushing
the front cover release button.
Note
❒ Close the Bypass Tray if it is ex-
tended. If the Bypass Tray is ex-
tended, the front cover does not
open.
BBBB
If you see the misfed paper, slow-
ly pull it out.
If you cannot remove paper easily,
do not forcefully pull it, but go to
next step.
CCCC
Pull part "A" in the direction of
the arrow, and then open the cov-
er.
• The inside of the machine be-
comes very hot. Do not touch the
parts with a "
v" label (means
hot surface). Touching a part
with a "
v" label (means hot sur-
face) could result in a burn.
ZHBP281E
ZHBH120E
ZHBH070E
A
AresPGBMaintGuide-F_FM.book Page 69 Friday, July 26, 2002 5:17 PM