Ricoh CL3000DN - Manual (Page 53)

Adjusting the Image Density
49
4
Adjusting the Image Density
Adjust the image density when the
print side of the page is shaded or the
print image looks patchy.
Important
❒ Extreme settings may create out-
put that appears dirty.
❒ Image density settings should be
made from the application or the
printer driver whenever possible.
Note
❒ Changing the image density set-
ting might cause a deterioration of
color balance. We recommend that
you leave the image density at its
factory default setting.
AAAA
Press the
{{{{Menu}}}} key.
"Menu" appears on the panel dis-
play.
BBBB
Press the
{{{{U U U U}}}} or {{{{T T T T}}}} key to dis-
play "Maintenance", and then
press the
{{{{Enter #}}}} key.
CCCC
Press the
{{{{U U U U}}}} or {{{{T T T T}}}} key to dis-
play "Image Density", and then
press the
{{{{Enter #}}}} key.
The following message appears on
the panel display.
DDDD
Press the
{{{{Enter #}}}} key.
The following message appears on
the panel display, and then press
the
{{{{Enter #}}}} key.
EEEE
Compare the colors on the printed
image density test sheet with
those on the Image Density Ad-
justing Card.
Note
❒ If the image density of the Im-
age Density Adjusting Card is
equal to the framed part of the
test sheet, you do not need to
adjust the image density value.
Menu:
Maintenance
ZHBS010E
Maintenance:
Image Density
Image Density:
Prt. Test Sheet
Prt.Test Sheet:
Press # to Start
Printing
AresPGBMaintGuide-F_FM.book Page 49 Friday, July 26, 2002 5:17 PM