Adjusting the tray registration, 4adjusting the tray registration – Ricoh CL3000DN User Manual
Page 55
Adjusting the Tray Registration
51
4
Adjusting the Tray Registration
You can adjust the registration of
Tray 2 and Tray 3 (optional Paper
Feed Unit). The vertical adjustment is
used for all trays. Normally, you need
not update the registration. But when
the optional Paper Feed Unit or the
Duplex Unit is installed, updating the
registration is useful in some cases.
The following procedure describes
how to adjust the registration of Tray
2. You can use the same procedure to
adjust the other tray as well.
AAAA
Press the
{{{{Menu}}}} key.
"Menu" appears on the panel dis-
play.
BBBB
Press the
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to dis-
play "Maintenance", and then
press the
{{{{Enter #}}}} key.
CCCC
Press the
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to dis-
play "Registration", and then
press the
{{{{Enter #}}}} key.
DDDD
Print the test sheet to preview the
settings.
A Confirm that "Prt. Test Sheet"
is displayed, and then press
the
{{{{Enter #}}}} key.
B Press the {{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to dis-
play the tray to adjust, and
then press the
{{{{Enter #}}}} key.
The test sheet is printed, and
then the printer returns to the
previous menu.
EEEE
Confirm the position of the image
on the test sheet, and then adjust
the registration value.
The following steps show how to
adjust the registration value to
make the margins equal.
Menu:
Maintenance
Maintenance:
Registration
ZHBS010E
Registration:
Prt. Test Sheet
Prt. Test Sheet:
Tray 2
AresPGBMaintGuide-F_FM.book Page 51 Friday, July 26, 2002 5:17 PM