Response level, Turn rate limit, Off course warning angle – Raymarine autopilot User Manual

Page 106: Autorelease (i/o drives only)

Advertising
background image

Chapter 7: Adjusting Autopilot Settings

93

7

Adjusti

ng Au
to

pil

ot

Setti

ng

s

Response level

This screen determines the default response setting. This screen also
appears in User Calibration – see page 85 for full details (or refer to
the Appendix for Type 100/300 autopilots).

Turn rate limit

Note: Not available if vessel type = SAIL BOAT.

This limits your boat’s rate of turn under autopilot control.

Off course warning angle

This screen determines the angle used by the OFF COURSE warning
(see page 10). The OFF COURSE warning operates if the pilot strays off
course by more than the specified angle for more than 20 seconds.

AutoRelease (I/O drives only)

Note: Only available if vessel type = STERNDRV.

If the vessel type is set to STERN DRV (I/O or stern drive), you will see
the AutoRelease screen (AUTO RELSE) set to ON as a default.

Screen text

Range

TURN RATE

1° to 30° per second in 1° steps

Screen text

Range

OFFCOURSE

15° to 40° in 1° steps

D3264-2

Locked heading

Boat heading

15˚ minimum

Advertising