Chapter 3: advanced operation – Raymarine autopilot User Manual
Page 28
Chapter 3: Advanced Operation
15
3
Chapter 3: Advanced Operation
The sections in this chapter explain how to use the more advanced
functions on your autopilot:
Note: If you are using the control unit with a non-150/400 autopilot
system, refer to the notes in the Appendix.
Using Track mode
Tracking between waypoints created on navigation
equipment connected to the autopilot system.
Using Wind Vane mode – sail boats
Using the autopilot to maintain a course relative to a
true or apparent wind angle.
Adjusting the rudder gain
Explains how to adjust the rudder gain setting (mainly
applies to non-GyroPlus Type 150/400 systems).
Displaying data pages
Describes how to use data pages to display SeaTalk and
NMEA information on the control unit. This section also
explains the Watch timer feature.