Raymarine autopilot - Manual (Page 27)

14 ST6001+ Autopilot Control Unit - Owner’s Handbook
2
Ba
si
c O
per
at
io
n
2.3 Adjusting display/keypad lighting
Note: When the display lighting is off, the control unit illuminates the
keys at a courtesy level.
To adjust the display and keypad lighting:
1. Press disp for 1 second from any mode to access the LAMP screen
and turn on the lights.
2. Press the disp key to cycle through the possible illumination
settings: LAMP 3 (the brightest setting), LAMP 2, LAMP 1, OFF,
LAMP 1, LAMP 2, LAMP 3 and so on:
•
as you change the setting, the illumination on any other
SeaTalk instruments or control units will also change
.
3. The display automatically returns to the previous mode if you do
not press a key for 10 seconds:
•
if you press another mode key within 10 seconds you will
select the mode assigned to that key (for example: auto
selects Auto mode, standby selects Standby mode)
Note: You can also adjust the lighting level from any other SeaTalk
instrument or control unit.
Note: When you switch off the unit you lose any changes you have
made to the lighting level.
D3313-3
SECOND