Adjust the rudder damping, Save the new settings – Raymarine autopilot User Manual
Page 75
62
ST6001+ Autopilot Control Unit - Owner’s Handbook
Adjust the rudder damping
Note: You only need to adjust the rudder damping value if the
autopilot ‘hunts’ when trying to position the rudder. Increasing the
rudder damping value reduces hunting.
To adjust the rudder damping:
1. Use the disp key to page through the Dealer Calibration screens
until you reach the RUDD DAMP screen.
2. Use the -1 or +1 keys to adjust the rudder damping:
•
increase the damping one level at a time until the autopilot
stops hunting, and always use the lowest acceptable value
Save the new settings
When you have adjusted these basic settings in Dealer Calibration:
•
press and hold standby for two seconds to store the changes
•
the screen will show DEALER CAL then the STANDBY screen