Roberts Gorden CoRayVac CRV-B-6 User Manual
Page 36
CRV-S
ERIES
I
NSTALLATION
, O
PERATION
AND
S
ERVICE
M
ANUAL
30
Step 8.6.3 Reflector Side Extension Installation for Decorative Grilles
Reflector Side Extension
Cut relief notches for tube
and reflector hangers.
A
NOTE: If the decorative grille system is to be installed in an area with
considerable air movement, it is recommended that one
#8 x 3/8" sheet metal screw be installed per reflector extension to
prevent it from blowing over.
Allow 6" (15 cm)
minimum clearance
between burner box
and overhead
obstructions for
service.
6" (15 cm) Minimum
Insert screw
here (see note).
Distance "A"
Extension
Minimum
Maximum
Part No.
Width
2" (4 cm)
6" (15 cm)
01370408
8" (20 cm)
6" (15 cm)
10" (26 cm)
01370412
12" (30 cm)
10" (26 cm)
14" (37 cm)
01370416
16" (40 cm)
Description
Part Number
Reflector Side Extension
01370412