Rena DA615 - Manual (Page 11)

\text\etd\DA615/operation 2.1 DA615 instruction manual
2. Operation
Connecting the printer
Interface cable Plug the interface cable into terminal (9) on the right-hand side of
the printer for a parallel interface connection or into terminal (10)
for a serial interface connection. Then lock it and connect the cable
to your PC.
Connection to
media feed unit Connect the cable of the media feed unit to the connector supplied
(11b). Connect the cable to the control signal terminal (11a).
Power cable
CAUTION!
The DA615 is an instrument of
Protection Class 1
The printer may be operated only from grounded power outlets !
Plug the power cable into the right-hand side of the printer (6).
Switching the printer on
Switch the printer on via the power switch (7).
The display in the control
panel (10) shows the
following brief message -
for initialization
DA615 Inkjet
Initialization
When the printer is in on-
line mode, the display
shown on the right
appears (for example).
100% Cour12 000000
On FAST Set1U Nor
The messages are explained on the next page.