Cleaning the ink nozzles, Print test, Counting addresses – Rena DA615 User Manual

Page 28: Counting test addresses, Counting received addresses

Advertising
background image

Printing

\text\etd\DA615\Printing

4.3

DA615 instruction manual

Cleaning the
ink nozzles

The ink nozzles are cleaned:

automatically when the printer is switched on

by pressing the “START +

“ keys simultaneously.

Print test

Press the “TEST” key. A sheet is pulled in and printed with a test
address. The sheet is then transported further and the next sheet is
pulled in (if other sheets are waiting on the feed plate).

Never touch the internal parts of the printer while it is

running!

Counting addresses

Every print operation is counted after the paper has been ejected. The number of
print operations can be seen in the right top of the display. The printer can count
addresses in two different and independent ways.

Counting test
addresses

A count of the test addresses represents the number of test print
operations performed by the printer after the paper is ejected. To
perform this count, press the “TEST” key when the printer is in off-line
mode.
If you switch to on-line by pressing the “START” key, the count will
disappear from the display but will remain stored in the printer.

If you return to off-line mode by pressing the "START" key again and
carry out more test prints, the stored counter number reappears in the
display and counting is continued.

By simultaneously pressing the "PAP" and "TEST" keys, you can reset
the currently displayed counter number to “0”.

Counting
received
addresses

An address count represents the number of data sets received by the
computer after the paper is ejected.

This counting takes place when the printer is on-line. The counted
number remains visible in the display until you press the "TEST" key in
off-line mode. Only when you change back to on-line mode does the
counted number of the received data-print operations reappear in the
display.
If you return to data transfer with printing, the counting is continued.

By simultaneously pressing the "START" and "PAP" keys, you can
reset the currently displayed counter number to “0”.

All address counters are reset when the printer is switched off!

Advertising