Rena DA615 - Manual (Page 13)

Operation
\text\etd\DA615/operation 2.3 DA615 instruction manual
What do the keys mean ?
On-line mode
Off-line mode Measurement
of paper width
Start/stop
Paper transport
Repeat print-out of
last address(es)
Print-out of a test address Programming mode
Measuring the transport speed Address rotation by 180°
☞
The four middle keys have a dual meaning, depending on the oper-
ating mode!
" START " key The "Start" key is used to switch between on-line and off-line
modes.
" PAP " key The "Pap" key is used to start or stop the transport unit.
" TEST " key The "Test" key is used to print the test address onto all sheets of
paper which are fed in.
If you press the “Test” key a second time, the print test is
terminated.
" PROG " key The "Prog" key gets you into programming mode.
key This key allows you to repeat the print out of the last (up to 20)
addresses.
key
This key allows you to measure the width of an inserted sheet of
paper.