Rena DA615 - Manual (Page 43)

Printer functions
\text\etd\DA615\printerf 5.14 DA615 instruction manual
Hardware Test Testing of various hardware components.
(For service personnel only!)
Head Reset Resets the ink counter after a new cartridge has been inserted (see
page 4.1).
Example of an application in programming mode
You want to set up a configuration whose line spacing is changed from
6 lines/inch to 8 lines/inch.
Switch the printer on.
Programming mode Press the "PROG" key.
Activate required
menu field Use the "PREV" or "NEXT" keys to move to the desired "Line spacing"
menu field. The blinking menu field is activated.
Changing from menu
field to option field Press the "ENTER" key. The option field (= 1 line to the right ) blinks.
Activate required
option field Use the "PREV" or "NEXT" keys to move to the desired option field
"8". The blinking option field is activated.
End programming
mode Press the "END" key. The new value is now stored in the configuration
under the selected "Setting No" and the printer is in off-line mode
again
or
Press the "START" key. The printer is now in on-line mode again and
is ready to continue the print job.
Initializing the printer
without loss of
configuration To get to the default configuration, select option "No 0" in the "Setting"
menu field in programming mode. To end programming mode, press
the "ENTER" key. The "Set 0U" message appears on the display. The
set configurations are stored under their respective setting numbers
(cf. "Setting" menu).
with loss of
configuration To return all the changed values and configurations to their original
settings, switch the printer off.
Keep the “PROG" key pressed down when switching the printer
on again.
The display shows DA615 Inkjet
Default Reset
The printer now has the default settings and all configurations as set at
the works. The display shows "Set 1U”.