Rena DA615 - Manual (Page 45)

\text/etd/DA615\Interfaces 6.1 DA615 instruction manual
6. Interfaces
The DA615 printer is equipped with two standard data communications interfaces.
The interface connection sockets are:
- Centronics parallel
- RS-232-C serial
Both of them allow connection of the printer to the terminal or the
computer.
Centronics parallel interface
The DA615 printer is equipped with a standard Centronics parallel
interface. This interface is most frequently used for connecting to a
personal computer. In contrast to the RS-232-C serial socket, it usually
requires no special instructions or configurations for the printer or
computer. In addition, the Centronics parallel interface cable allows
faster data transmission.
The parallel interface connector has a standard 36-pin Amphenol
socket with two metal clips.
Connecting socket Connector type: Amphenol socket strip
Design: 57 - 40360
Cable length max. 2 m with Amphenol
plug strip 57 - 30360
The signal description is given on the next page.