Rena DA615 - Manual (Page 38)

Printer functions
\text\etd\DA615\printerf 5.9 DA615 instruction manual
Character Set National character sets are available with their own special characters
in each language (see character sets in the Annex).
Transport
Direction Change of media transport direction Def. (from right ➔ left)
Opp. (from left ➔ right).
The transport direction can be changed only if you replace the hold-
down sets (cf. Section 3).
The default setting of the transport direction is from right to left.
Head12 Correct. This function allows a mechanical horizontal offset between the two
print cartridges 1 and 2 to be corrected. The correction is performed in
steps of
1
/
300
inch.
Select one of the following 49 values :
-24, -23 ... -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5 ... +23, +24
Head34 Correct. This function allows a mechanical horizontal offset between the two
print cartridges 3 and 4 to be corrected. The correction is performed in
steps of
1
/
300
inch.
Select one of the following 49 values :
-24, -23 ... -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5 ... +23, +24
First Unit This menu allows you to select the print cartridge block which –
depending on the transport direction – prints lines 1 to 6.
H12 for transport direction of the media from right to left
H34 for transport direction of the media from left to right
Paper Speed The maximum transport speed for each print quality may be set.
Paper Sensor End-of-form detection on/off.
When the end-of-form detection function is activated, the light barrier is
interrogated before every line is printed as to whether paper is present
in the print area.
For printing media with black surfaces, you can deactivate the light
barrier during printing. To do this, you must set a format size in the
“PAPER SIZE“ menu (see page 5.8).
When the end-of-form detection is deactivated and a format size has
been specified, the light barrier is interrogated as to whether paper is
present in the print area only when the paper is fed in.
☞
An incorrect format size can lead to printing outside the
paper area!