2 quick setup, Table 3-1 . installation overview, Quick setup – Runco PL-61DHD User Manual
Page 27: Pre l iminar y
Runco PlasmaWall Owner’s Operating Manual
17
PRE
L
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the PlasmaWall installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, refer to
page...
1
Mount the PlasmaWall on a wall or table stand
2
Connect the DHD Controller to the PlasmaWall
2
Connect signal sources to the DHD Controller
3
Connect external controller to DHD Controller RS-232 port
(optional)
4
Apply power to the PlasmaWall
5
Change the OSD language
6
If using the PlasmaWall with a PC, adjust PC display prop-
erties
7
Display calibration: adjust the following
for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
Note