Runco PL-61DHD - Manual (Page 56)

Maintenance and Troubleshooting
46 Runco PlasmaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
“Out of range” appears
on-screen. • The resolution and
frequency of the video
card in the computer are
not compatible with the
PlasmaWall.
• Select a compatible
resolution and vertical
frequency (refer to
Computer/Video Signal
Compatibility on
page 55).
The image is too large or too
small. • Image size needs
adjusting.
• Adjust the image size (refer
to Input Position on
page 38).
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution