Runco PL-61DHD - Manual (Page 66)

Specifications
56 Runco PlasmaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
HP 1280x1024 72.00 81.10 -- --
IBM 1280x1024 75.00 80.00 pos pos
SUN 1280x1024 76.10 81.10 Composite sync
IBM 1280x1024 85.00 91.10 pos pos
IBM 1280x1024 100.10 108.50 pos pos
IBM 1360x768 60.00 47.70 pos pos
IBM 1400x1050 60.00 65.30 neg pos
IBM 1400x1050 75.00 82.30 neg pos
IBM 1400x1050 85.00 93.90 neg pos
Table 7-3. Computer/Video Signal Compatibility Chart (continued)
Signal Type
Mode
(Dots x Lines)
Vertical
Frequency (Hz)
Horizontal
Frequency (kHz)
Sync Polarity
Horiz. Vert.
Notes:
1. The PlasmaWall may not be able to display images from notebook computers in simultaneous
(CRT/LCD) mode. Should this occur, switch the notebook computer to “CRT only” mode. If you
are unsure how to do this, refer to your notebook computer’s user manual.
2. When the aspect ratio is set to Anamorphic, all modes other than 1365x768 are scaled up or
down to 1365x768. When the aspect ratio is set to Standard 4:3, all modes other than
1024x768 are scaled up or down to 1024x768.