Runco PL-61DHD - Manual (Page 59)

Serial Communications
Runco PlasmaWall Owner’s Operating Manual 49
PRE
L
IMINAR
Y
TINT -100/100 YES Sets a value for tint
SHARPNESS -6/6 YES Sets a value for sharpness
NIGHT NA YES Loads “ISF Night” image preset
DAY NA YES Loads “ISF Day” image preset
CUSTOM1 NA YES Loads “Custom 1” image preset
CUSTOM2 NA YES Loads “Custom 2” image preset
TRIGGER 1/3 YES Assigns trigger to currently-selected aspect
ratio
BKGND -100/100 YES Sets the background color for letterbox or
4:3 aspect ratio (-100 = black; 100 = white)
IHPOS? NA NA Returns input horizontal position value
IHEIGHT? NA NA Returns input height value
OHPOS? NA NA Returns output horizontal position value
OHEIGHT? NA NA Returns output height value
COLOR? NA NA Returns color setting value
ASPECT? NA NA Returns current aspect ratio
INPUT? NA NA Returns active input
OUTRES? NA NA Returns output resolution
SERIALNUM? NA NA Returns product serial number
DATE? NA NA Returns product manufacture date
IVPOS? NA NA Returns input vertical position value
OVERSCAN? NA NA Returns overscan percentage
OVPOS? NA NA Returns output vertical position value
BRIGHTNESS? NA NA Returns brightness setting value
TINT? NA NA Returns tint setting value
PRESET? NA NA Returns currently-selected preset
(ISF Day, ISF Night, Custom 1 or Custom 2)
POWER? NA NA Returns power status
ASPECTIN? NA NA Returns the input source aspect ratio
SWVER? NA NA Returns software version number
IWIDTH? NA NA Returns input horizontal width value
PHASE? NA NA Returns phase setting value
Table 6-1. Serial Commands (continued)
Command
Parameter
(min/max)
Value
Stored?
Description