Runco PL-61DHD - Manual (Page 58)

Serial Communications
48 Runco PlasmaWall Owner’s Operating Manual
P
RELI
M
INARY
HD1 NA YES Selects the RGB HD 1 input
HD2 NA YES Selects the RGB HD 2 input
DVI1 NA YES Selects the DVI 1 input
DVI2 NA YES Selects the DVI 2 input
HD1PASS NA YES Loops HD1 Input to RGB/HD output
HD2PASS NA YES Loops HD2 Input to RGB/HD output
OUT169 NA YES Sets the output screen to 1.78:1 (16:9)
OUT235 NA YES Sets the output screen to 2.35:1
ANAMORPHIC NA YES Selects the Anamorphic aspect ratio
STANDARD NA YES Selects the Standard (4:3) aspect ratio
LETTERBOX NA YES Selects the Letterbox aspect ratio
VIRTUALWIDE NA YES Selects the VirtualWide aspect ratio
CINEMA NA YES Selects the Cinema aspect ratio
RGBNN NA YES Outputs color space RGB with negative,
negative sync
RGBPP NA YES Outputs color space RGB with positive,
positive sync
RGBS NA YES Outputs color space RGB with embedded
sync on green
PHASE 0/3 YES Adjusts phase
IHPOS -100/100 YES Sets a value for horizontal input position
IVPOS -100/100 YES Sets a value for vertical input position
IWIDTH -100/100 YES Sets the value for input width
IHEIGHT -100/100 YES Sets the value for input height
OVERSCAN 0/10 YES Sets the overscan percentage
OHPOS -100/100 YES Sets the value for output horizontal position
OVPOS -100/100 YES Sets the value for output vertical position
OWIDTH -100/100 YES Sets the value for output width
OHEIGHT -100/100 YES Sets the value for output height
BRIGHTNESS -100/100 YES Sets a value for brightness
CONTRAST -100/100 YES Sets a value for contrast
COLOR -100/100 YES Sets a value for color
Table 6-1. Serial Commands (continued)
Command
Parameter
(min/max)
Value
Stored?
Description