Radio Shack 7-in-1 Remote Control with Lighted Keypad User Manual
Page 14
Need help? Call
1-800-989-4706
14
5. Hold down
SET UP
on the 7-in-1 until the red
light above
turns on.
6. Press Plug ’n Power, then enter
0 – 1
–
4
on
the 7-in-1. The red light turns off.
7. Press Plug ’n Power on the 7-in-1.
8. To turn on all light and appliance modules set
to the same house code as the IR command
console, press
POWER (All Lts On)
on the 7-
in-1, or ALL LIGHTS ON on the IR command
console.
To turn off all light and appliance modules set
to the same house code as the IR command
console, press
MUTE (All Off)
on the 7-in-1,
or ALL UNITS OFF on the IR command con-
sole.
9. To turn specific lights and appliances on or
off using the 7-in-1 Remote Control, press
the digit key (
1
,
2
,
3
,
4
,
5
,
6
,
7
, or
8
) for the
module you want to control. Then press
On
or
Off
(
CHANNEL + (On)
or
CHANNEL – (Off)
).
To control specific lights and appliances
directly from the IR command console, set
the console’s selector to the number of the
module you want to control (
1–4
or
5–8
),
press the button on the console that corre-
sponds to the number of the module you
want to control (1/5, 2/6, 3/7, 4/8), then press
ON on the IR command console.
10. To brighten or dim lights connected to lamp
and appliance modules, press the digit key
for the module you want to control. Then
hold down
VOLUME + (Brt)
or
VOLUME –
(Dim)
on the 7-in-1. Release the key when
the desired level of brightness is reached.
Note: You must select the individual light to
brighten or dim even if you used
POWER (All
Lts On)
on the 7-in-1 to turn on all the lights
at the same time.
15-1924.fm Page 14 Monday, July 19, 1999 12:50 PM