Radio Shack 7-in-1 Remote Control with Lighted Keypad - Manual (Page 2)

Need help? Call 1-800-989-4706
2
FEATURES
Your RadioShack 7-in-1 Remote Control can re-
place up to seven infrared remote controls. You
can use it to control your TV, VCR, cable box, sat-
ellite receiver, and even lights and appliances
with Plug ’n Power modules (not included).
The 7-in-1 is preprogrammed with the most com-
monly used commands. All you have to do is tell
it which TV, VCR, or other components’ remote
controls you want to replace (by entering 3-digit
codes). The 7-in-1 remote also lets you teach it
more specialized commands from other remotes
and store them in its memory. This lets you oper-
ate most of the same functions as the original re-
motes.
This manual includes a list of many manufactur-
ers’ 3-digit codes for TVs, VCRs, cable convert-
ers, CD players, satellite receivers, and other
popular remote-controlled devices.
The 7-in-1 Remote Control’s features include:
Powerful Infrared Beam — so you can operate
your remote-controlled devices from a greater
distance than with many of the original remote
controls.
Lighted Keypad — lights up so you can see the
keys even in a dark or dimly lit room.
Timer — lets you set the 7-in-1 to turn off your TV
after 60 minutes.
Plug ’n Power Functions — allow you to oper-
ate Plug ’n Power modules with your 7-in-1 re-
mote and an optional IR command console (Ra-
dioShack Unlimited No. 10037703) or Plug ’n
Power Wireless Remote Control System (Ra-
dioShack Cat. No. 61-2676).
© 1997, 1998 Tandy Corporation.
All Rights Reserved.
Plug ’n Power and RadioShack are registered trademarks
used by Tandy Corporation.
X-10 is a registered trademark of X-10 (USA) Inc.
15-1924.fm Page 2 Monday, July 19, 1999 12:50 PM